DBPapers
Home > RECYCLING > Papers SGEM2018 > Papers SGEM2018

Papers SGEM2018

All papers published in this subsection are part of SGEM2018 Conference Proceedings (ISSN 1314-2704). The SGEM Conference Proceedings are evaluated and indexed by Clarivate Analytics ISI Web of Science/ Web of Knowledge, SCOPUS, Engineering Village/Compendex, ProQuest, EBSCOhost, British Library, Springer Nature. Every paper is registered in CrossRef database and has its own DOI (Digital Object Identifier). Papers could be also found via Mendeley, CiteULike, Google Scholar and Russian eLibrary.ru (РИНЦ).

Articles in this section


RECYCLING OF SELECTED PLASTIC COMPONENTS FROM VEHICLES OVER THEIR LIFETIME (Papers SGEM2018)

M. Badida, T. Dzuro, L. Sobotova, A. Badidova, A. Mikulova
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The automotive industry is today a sector that significantly influences and at the same time develops other sectors of the national economy such as engineering, metallurgical, electrical, chemical or construction industries. The paper deals with the possibility of recycling recovery (...)


RECYCLING OF USED FILAMENT FROM 3D PRINTING (Papers SGEM2018)

J. Fries, A. Durna
Thursday 11 October 2018 by Libadmin2018
ABSTRACT This article discusses the possibilities of recycling waste material generated using 3D FDM or FFF printing technology and its use in the re-production of printed material. Additive technology is an increasingly popular method for the rapid design of components and machinery parts. It (...)


RECYCLING OFMSW AT THE SITE OF PRODUCTION FOR ENERGY GENERATION (Papers SGEM2018)

M. Neugebauer, K. Nalepa, P. Sołowiej, J. Hałacz, M. Wesolowski
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Waste poses a growing problem is the contemporary world. The volume of household waste per resident continues to increase at a staggering rate. In line with the EU requirements, growing proportions of waste should be recycled, and Poland is expected to recycle 50% of its entire waste (...)


RESOURCES MANAGEMENT AND ECO-EFFICIENCY - CRITICAL METALS, AN EXAMPLE (Papers SGEM2018)

A. BUTU, S. RODINO, G. FIDLER, M. BUTU
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Critical metals are those metals considered to be of fundamental importance for high-level industrial development. The definition of criticality derives, on the one hand, from the concentration of raw material sources in certain geographic areas, and on the other hand, the (...)


STEAM GASIFICATION OF WASTE TIRES FOR THE PURPOSE OF METHANOL PRODUCTION (Papers SGEM2018)

A. Matveev, A. Dubinin, S. Shcheklein
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Waste disposal and management is one of the urgent issues faced by mankind at the current stage of development. Waste car tires pose a significant threat to the environment, which makes their efficient processing particularly important, as the volume of this type of waste generated (...)


STUDY OF THE PHYSICO-MECHANICAL AND THERMAL PROPERTIES OF SELF-COMPACTING CONCRETES MADE FROM HIGH ALUMINA REFRACTORY BRICKS WASTE FILLERS (Papers SGEM2018)

M. Saidi, I. Djefour, R. A. Boucetta, B. Laichaoui
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The work presented in this article is based on the formulation and research of the mechanical and thermal properties of self-compacting concretes (SCC) made from the cement industry waste. This waste is of high alumina, finely ground and incorporated as filler. Mechanical testing in (...)


COMPARISON OF HEAVY METALS LEACHABILITY FROM COMBUSTION WASTES USING BATCH LEACHING TESTS (Papers SGEM2018)

J. Fronczyk, A. Szwader
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Combustion wastes, such as fly ashes and slags, can be recycled primarily by using them in road construction. Nonetheless, their potential negative impact on the environment cannot be omitted. In practice, a number of methods are used for the leaching characterization of wastes, (...)


DETERMINATION OF COMBUSTIBLE SULFUR CONTENT IN SEWAGE SLUDGE (Papers SGEM2018)

I. Nicolescu, B. Stanescu, A. Serbanescu, M. Barbu, A. G. Traistaru
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Large amounts of sewage sludge are produced at waste water treatment plants and its disposal is an environmental problem. In this context and in accordance with the European Commission communication on the role of waste-to-energy in the Circular Economy, one of the objectives of (...)


ECONOMY OF PACKAGING AND WASTE FROM PACKAGING ON THE EXAMPLE OF THE WOOD INDUSTRY (Papers SGEM2018)

D. Palka, M. Tutak
Thursday 11 October 2018 by Libadmin2018
ABSTRACT In recent years, the packaging market has become an important element of the economy of many countries. Its growing importance is associated with rapid industrial development, globalization, free transfer of goods and growing demand from consumers. Customer requirements affect the (...)


EFFECT OF THE NATURE OF FIBERS ON THE MECHANICAL PROPERTIES OF PLASTER IN PRESENCE OF SUPERPLASTICIZER (Papers SGEM2018)

K. BENYOUNES, N. MESBOUA , S. DANI, A. MISSAOUI
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Plaster and composites made up of gypsum have been extensively used in building for various purposes. This work aims to study the use of polypropylene (synthetic polymer), Alfa (Stipa tenacissima ) and plastic waste as fiber in the manufacture of plaster and mortar plaster . In this (...)


Home | Contact | Site Map | Site statistics | Visitors : 353063

Follow site activity en  Follow site activity RECYCLING  Follow site activity Papers SGEM2018   ?

CrossRef Member    Indexed in ISI Web Of Knowledge   Indexed in ISI Web Of Knowledge
   

© Copyright 2001 International Multidisciplinary Scientific GeoConference & EXPO SGEM. All Rights Reserved.

Creative Commons License