DBPapers
Home > EXPLORATION AND MINING > Papers SGEM2018 > Papers SGEM2018

Papers SGEM2018

All papers published in this subsection are part of SGEM2018 Conference Proceedings (ISSN 1314-2704). The SGEM Conference Proceedings are evaluated and indexed by Clarivate Analytics ISI Web of Science/ Web of Knowledge, SCOPUS, Engineering Village/Compendex, ProQuest, EBSCOhost, British Library, Springer Nature. Every paper is registered in CrossRef database and has its own DOI (Digital Object Identifier). Papers could be also found via Mendeley, CiteULike, Google Scholar and Russian eLibrary.ru (РИНЦ).

Articles in this section


PRACTICAL DEMONSTRATION OF TECHNOLOGIES PREVENTING THE DUST SPREADING IN COAL MINING OPERATION AREA (Papers SGEM2018)

V. MONI, J. TAUBER, T. MILETIC, M. REHOR
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The target of this article is the providing of the brief information about preventing the dust spreading problems solving during operations of machinery equipment in brown coal open pit mines and in coal dumps. The main part of this paper briefly describes operation tests of the new (...)


PRACTICAL SOLUTIONS FOR THE CALCULATION OF HYDRAULIC POWER SYSTEMS NETWORKS FOR THE ROOF SUPPORTS (Papers SGEM2018)

S. Vatavu
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The particularities of the hydraulic system of the roof supports are determined by the repetitive structure specific to the supporting component, by the supply network, by the operating liquid and by the length of the coalface, as well as by the operation principle of the pumping (...)


PREDICTIVE MAINTENANCE OF MINING MACHINERY BASED ON VIBRATIONAL ANALYSIS (Papers SGEM2018)

J. Castilla, J.C. Fortes, J.M. Davila, S. Melgar, A. Sarmiento
Thursday 11 October 2018 by Libadmin2018
ABSTRACT One of the main problems industries in general are facing is the prediction of errors or failures of the most sensitive or critical assets of their equipment. For this reason, techniques based on predictive maintenance are emerging, searching for the early detection of possible (...)


PRELIMINARY WORK ON THE NEW LINING CONSTRUCTION FOR THE SHAFTS PASSING THROUGH SALT ROCK MASSIF (Papers SGEM2018)

P. Czaja, P. Kamiński
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The paper presents a patented and copyright protected concept of constructing a shaft lining that goes through salt rock massif having strong rheological properties and being susceptible to leaching. In the case of salt layers, especially on significant depths (over 1000 m) the (...)


SEISMIC PEAK PARTCILE VELOCITY AND ACCELERATION RESPONSE TO MINING FACES FIRING IN A LIGHT OF NUMERICAL MODELING AND UNDERGROUND MEASUREMENTS (Papers SGEM2018)

W. Pytel, P. Mertuszka, A. Lurka, K. Fulawka, M. Szumny
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Extraction of the copper ore deposit in the Legnica-Głogow Copper Basin in Poland is usually associated with high seismic activity. In order to face this threats, a number of organizational and technical prevention methods are utilized, from which blasting works seem to be the most (...)


PROPOSAL OF ALTERNATIVES FOR THE TRANSPORT OF BACKFILL MATERIAL BASED ON THE CAPACITY CALCULATION OF TRUCK TRANSPORT IN MINING CONDITIONS: CASE STUDY (Papers SGEM2018)

D. Marasova
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Various methods are used in the mining of minerals, where the transport of material is an integral part. This paper deals with the transport problem of backfill material from surface stock to underground tank. To solve the problem is applied the capacitive calculation of transport (...)


QUANTITATIVE WEAR FACTOR AND THERMAL WORK ANALYSIS OF MINING ASYMMETRICAL DISC TOOLS (Papers SGEM2018)

P. Mendyka
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The article presents the second part of the results of asymmetrical disc tools laboratory tests. The first part of this study was presented at SGEM International Conference in 2017. Asymmetrical disc mining tools can be used for mechanical mining of hard rocks, as an alternative to (...)


RADON EXPOSURE EVALUATION IN THE JIU VALLEY COAL BASIN (Papers SGEM2018)

M. Popescu - Stelea, R.I. Moraru, G.B. Babut, L. Crihana
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Natural sources can contribute with significant radiation quantities toward the total radiation exposure that humans receive. The majority of this natural radiation is harmless to humans in the ambient environment. However, radon, a large component of the natural radiation which (...)


RAW MATERIAL POLICY AND POTENTIAL SOURCES OF RAW (Papers SGEM2018)

L. Tkacikova, A. Mokrosova
Thursday 11 October 2018 by Libadmin2018
ABSTRACT This article is intended to bring closer the raw materials policy of the Czech Republic, which is part of the European Union, so the article also refers to marginal and raw material policy of the European Union and secondly it is the aim of article introducing potential sources of (...)


RECONDITIONING TECHNOLOGY DIRECTLY INTO OPEN PIT MINING OF SOME TECHNOLOGICAL EQUIPMENT SUBASSEMBLIES (Papers SGEM2018)

V. A. Florea
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The rocks exploited in quarries have certain physical, mechanical and technological characteristics that favors the intense wear, especially by abrasion of the active surfaces of the subassemblies of the technological equipment. Some spare parts and subassemblies are subject to (...)


Home | Contact | Site Map | Site statistics | Visitors : 353063

Follow site activity en  Follow site activity EXPLORATION AND MINING  Follow site activity Papers SGEM2018   ?

CrossRef Member    Indexed in ISI Web Of Knowledge   Indexed in ISI Web Of Knowledge
   

© Copyright 2001 International Multidisciplinary Scientific GeoConference & EXPO SGEM. All Rights Reserved.

Creative Commons License