DBPapers
Home > MICRO AND NANO TECHNOLOGIES > MICRO AND NANO TECHNOLOGIES

MICRO AND NANO TECHNOLOGIES

- Micro and nano-structured materials and devices
- Micro and nano particles and applications
- Computational nanoscience and nanotechnology
- Simulation, design and modeling
- Soft micro and nano technologies and applications
- Energy technologies and applications
- Green nanotechnology, environment and society
- Environmental Risk Assessment and Decision-Making for Nanomaterials

Articles in this section


RESEARCH AND MATHEMATICAL MODELING OF THE PROCESS OF OBTAINING A NANOCOMPOSITE OF SIC-CNT (Papers SGEM2018)

A. Shaneva, A. Zhensa, E. Zharikov, N. Popova, E. Koltsova
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The reinforcement of ceramic composites with the help of carbon nanotubes (CNTs) is used to increase and stabilize the mechanical properties of composites based on silicon carbide, such as strength, fracture toughness and modulus of elasticity. To save the properties and reduce the (...)


RETENTION CAPACITY OF POLYSULFONE MEMBRANE IN WASTEWATER TREATMENT (Papers SGEM2018)

L. G. TIRON, E. DANAILA, G. Genoveva ISTRATE, S. BALTA, M. VLAD
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The polymers performance in membrane technology provide a stable and very high level of pollutant removal. The selection capacity and low cost of the polymeric membrane technology are important factors in wastewater treatment applications. Four membranes from polysulfone with (...)


STATISTICAL EVALUATION OF NUTRITIONAL CHARACTERISTICS FOR SEVERAL CHEESE TYPES (Papers SGEM2018)

A. B. Velciov, S. Popescu, A. Cozma, D. Lalescu, I. David
Thursday 11 October 2018 by Libadmin2018
ABSTRACT For a balanced life, milk and dairy products occupy an important place in the gastronomic culture of each country and are highly appreciate for their nutritional values. Cheese, as the most consumed milk – derived product, it turned out to be a food product rich in nutrients that was (...)


STUDIES ON DANUBE WATER FILTRATION PERFORMANCE OF NANOCOMPOSITE ULTRAFILTRATION MEMBRANES (Papers SGEM2018)

S. C. PINTILIE, M. BODOR, A. L. LAZAR, I. G. BIRSAN, S. BALTA
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Membrane technology is a separation process used predominantly in the primary and secondary sectors of industry, being a viable option over conventional water and wastewater treatment systems. Due to fresh water scarcity increment at global scale, it is essential to develop a best (...)


SUPERCRITICAL EQUIPMENT OF DIFFERENT VOLUME TO PRODUCE AEROGELS IN FORM OF PARTICLES - PROSPECTS OF SCALE-UP (Papers SGEM2018)

N. V. Menshutina, D. D. Lovskaya, A. E. Lebedev
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The unique properties of aerogels make them promising materials for use in various industries. The production lines, which are currently organized by foreign companies, are aimed at obtaining exclusively monoliths and blankets of aerogels of certain sizes. However, for many (...)


SURFACES MORPHOLOGY, ROUGHNESS AND WETTING PROPERTIES OF NANOPOROUS ALUMINUM OXIDE FILM FORMED ON 1050 ALUMINUM ALLOY BY CONTROLLED ELECTROCHEMICAL OXIDATION (Papers SGEM2018)

V.M. Dumitrascu, L. Benea N.L. Simionescu
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Due to its properties, lightweight, strength and corrosion resistance aluminum and its alloys are chosen for building various industrial equipments that are used in different specific environments. Aluminum and its alloys cannot escape from corrosion and it requires a proper (...)


TECHNOLOGICAL METHODS TO REDUCE WELDING STRESSES AND DISTORTIONS (Papers SGEM2018)

C. Rontescu, D.T. Cicic, A.D. Bucur, A.M. Bogatu
Thursday 11 October 2018 by Libadmin2018
ABSTRACT When metal structures are manufactured, the heat cycle introduced by the applied welding technology can cause structural changes in the base material, as well as residual stresses, which under certain circumstances can lead to changes in the shape of the structure. This paper (...)


THE INFLUENCE OF THE WAY OF DEPOSITING THE FILLER MATERIAL ON THE GEOMETRICAL CHARACTERISTICS OF THE WELD BEAD (Papers SGEM2018)

C. Rontescu, D.T. Cicic, A.M. Bogatu, P. Constantin
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The welding characteristics of the welded joints are directly influenced by the thermal conditions applied during welding. At the same time, the welding type process influences the geometry of the welded seam, the nature and the extent of the structural transformations, the (...)


THE NONLLINEAR MATHEMATICAL 2D MODEL FOR THE ANALYSIS OF TEMPERATURE REGIMES IN THERMOSENSITIVE LAYERED MEDIUM WITH INCLUSIONS (Papers SGEM2018)

V. Havrysh, R. Kochan, L. Kolyasa, V. Loik, M. Kubica
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The aim of the paper is determination of the temperature field which is caused by a heat flux in a thermosensitive (thermophysical parameters depending on temperature) layered medium which contains a foreign inclusion. The heat flux is concentrated at one of the boundary surfaces of (...)


THE REACTOR SYSTEM FOR BIOSYNTHESIS OF BACTERIAL CELLULOSE WITH DESIRED MICROFIBRIL ORIENTATION (Papers SGEM2018)

K. Bolotova, I. Vydrina
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The drip feed reactor system for continuous biosynthesis of bacterial cellulose with desired microfibril orientation is proposed. Native bacterial cellulose is obtained on the glucose media using symbiotic complex of yeast and bacteria A.xylinum. Micromorphological characteristics (...)


Home | Contact | Site Map | Site statistics | Visitors : 353063

Follow site activity en  Follow site activity MICRO AND NANO TECHNOLOGIES   ?

CrossRef Member    Indexed in ISI Web Of Knowledge   Indexed in ISI Web Of Knowledge
   

© Copyright 2001 International Multidisciplinary Scientific GeoConference & EXPO SGEM. All Rights Reserved.

Creative Commons License