DBPapers
Home > MICRO AND NANO TECHNOLOGIES > MICRO AND NANO TECHNOLOGIES

MICRO AND NANO TECHNOLOGIES

- Micro and nano-structured materials and devices
- Micro and nano particles and applications
- Computational nanoscience and nanotechnology
- Simulation, design and modeling
- Soft micro and nano technologies and applications
- Energy technologies and applications
- Green nanotechnology, environment and society
- Environmental Risk Assessment and Decision-Making for Nanomaterials

Articles in this section


NEW IMPROVEMENTS TO THE MANUFACTURING PROCESS OF METAL OXIDE VARISTORS (Papers SGEM2018)

M. C. Vinga, M. Frigura-Iliasa, P. Andea, F. M. Frigura-Iliasa, M. Mirica
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Metal Oxide based Varistors are basically ceramics, acting as n – semiconductors, having a poly-crystalline and dense structure. The main application of these power electronic devices is for construction of overvoltage protection equipment (for every voltage level), because of some (...)


OBTAINING AND CHARACTERIZATION OF WOOD-MINERAL COMPOSITES (Papers SGEM2018)

V. Danilov, A. Ayzenshtadt, T. Makhova
Thursday 11 October 2018 by Libadmin2018
ABSTRACT This work is devoted to obtaining and characterization of wood-mineral composites based on wood debarking waste and basalt screenings, which have improved ecological,strength, sound and heat insulation properties. To achieve this goal, the following tasks were solved: the (...)


OBTAINING COMPOSITE MATERIALS OF THE POLYMER-ALUMINUM TYPE BY GLUING USING BICOMPONENT ADHESIVES (Papers SGEM2018)

A. Dimitrescu, A. M. Alecusan, C. Babiş, O. Chivu, L. Ungureanu
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The necessity of fulfilling as many conditions as possible in the specification resulted in the creation of composite materials. This idea developed in the aerospace industry was later used successfully in all industrial branches. The two materials that have been used are (...)


ON DEFORMATION BEHAVIOUR AND MICROSTRUCTURAL CHANGE OF CU-9.51AL-3.81NI ALLOY (Papers SGEM2018)

G. Gurau, C.Gurau, M. Marin, F. B.Marin
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Polycrystalline hypoeutectoid aluminum bronze was fabricated by melting of pure metals technique in an induction furnace. Cu-Al-Ni alloy was investigated in cast state and after hot extrusion. Moreover, thermomechanical treatments was conducted via torsion tests between room (...)


OPERATING CHARACTERISTICS OF CONCRETE MODIFIED BY HIGH-DISPERSED SAPONITE-CONTAINING MATERIAL (Papers SGEM2018)

M. Morozova, M. Frolova, V. Lesovik, A. Ayzenshtadt
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Implementation of the development program for the Northern and Arctic territories is not possible without the use of modern materials and technologies in the construction industry. One of the most common and popular building materials is the fine grained concrete, for the (...)


OPTIMIZATION OF SOLUBILITY OF AMIODARONE HYDROCHLORIDE THROUGH COMPLEXATION WITH HYDROXYPROPYL-β-CYCLODEXTRIN (Papers SGEM2018)

A. Creteanu, A. Stefanache, G.Tantaru, M. Vieriu, L. Ochiuz
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Amiodarone (AMD) is an antiarrhythmic agent used for the treatment of ventricular arrhythmias, arterial fibrillation, and severe rhythm disorders. The main therapeutic disadvantage of AMD is its low oral bioavailability and low water solubility. The aim of the study was to obtain (...)


ORGANIC-MINERAL MODIFIER FOR PETRIFICATION OF WOOD (Papers SGEM2018)

N.V. Kiliusheva, A.M. Ayzenshtadt, V.E. Danilov, A.A. Stenin
Thursday 11 October 2018 by Libadmin2018
ABSTRACT The current stage in the development of the construction industry is associated with improving the consumer properties of composite materials, increasing their operational efficiency, increasing production volumes and service lives. One of the ways to solve the problem associated (...)


PHASE TRANSITION OF HEXAGONAL BE NANOCRYSTAL INTO CUBIC SUPERLATTICE UNDER X-RAY RADIATION (Papers SGEM2018)

Thursday 11 October 2018 by Libadmin2018
ABSTRACT The structure and phase composition of annealed and irradiated beryllium plates were studied by X-ray analysis. Durable X-ray irradiation leads to phase transition of a normal hexagonal beryllium lattice into a beryllium superlattice. This superlattice is composed of beryllium (...)


PRODUCTION OF POLYMER CONCRETE COMPOSITIONS EFFECTIVE IN UNDERGROUND AGGRESSIVE MEDIUM (Papers SGEM2018)

N. Chikhradze, G. Abashidze, D. Tsverava
Thursday 11 October 2018 by Libadmin2018
ABSTRACT On the base of unsaturated polyester resin and nano powder fillers, polymer concrete (PC) was produced applicative in aggressive underground conditions. The curing agents of the resin for the polyester resin were Akcobalt 6% (cobalt 2-ethylhexanoate mixture) and Akperox A1 (Methyl (...)


PROPERTIES OF ANTI-CORROSIVE FERRITE PIGMENT SYNTHESIZED WITH THE USE OF PRODUCTION WASTE (Papers SGEM2018)

S. N. Stepin, E. I. Garifullina, V. E. Katnov, I. V. Usmanov, S. I. Tolstosheyeva
Thursday 11 October 2018 by Libadmin2018
ABSTRACT Pigments of the inhibitory type are the active principle of most primers used to protect metals from corrosion. Developers of anticorrosive paint and varnish materials seek to replace chromium-containing pigments, which widely used until recently due to their toxicity, with more (...)


Home | Contact | Site Map | Site statistics | Visitors : 353063

Follow site activity en  Follow site activity MICRO AND NANO TECHNOLOGIES   ?

CrossRef Member    Indexed in ISI Web Of Knowledge   Indexed in ISI Web Of Knowledge
   

© Copyright 2001 International Multidisciplinary Scientific GeoConference & EXPO SGEM. All Rights Reserved.

Creative Commons License