Home > MICRO AND NANO TECHNOLOGIES > MICRO AND NANO TECHNOLOGIES
MICRO AND NANO TECHNOLOGIES
Micro and nano-structured materials and devices Micro and nano particles and applications Computational nanoscience and nanotechnology Simulation, design and modeling Soft micro and nano technologies and applications Energy technologies and applications Green nanotechnology, environment and society Environmental Risk Assessment and Decision-Making for Nanomaterials
Articles in this section
INVESTIGATION OF ELECTROCHEMICAL PROPERTIES IN CHLORIDE-CONTAINING COMMERCIAL WATERS (Papers SGEM2018)
A. Narivskiy, R. Atchibayev, A. Muradov, K. Mukashev, Y. Yar-Mukhamedov
Thursday 11 October 2018 by
ABSTRACT
The complex of physical-chemical investigations on study of regularities, mechanisms
and peculiarities in the oxidation process of an alloy 06XN28MDT has been carried
out. As a result of the corrosion tests the corrosion losses of Cr, Ni and Fe from
surface of alloy 06XN28MDT in (...)
RESOURCE-SAVING PRODUCTION TECHNOLOGY OF PRODUCTS MADE OF POLYMERIC MATERIAL: PROBLEM AND SOLUTION (Papers SGEM2018)
D. Y. Kobzev, P. V. Kombarova, A. N. Blokhin, V. P. Tarov, G. S. Baronin
Thursday 11 October 2018 by
ABSTRACT
At the present time, the widespread introduction of cost-effective production of a method for processing pressure in the solid phase of polymeric materials is hampered by the fact that despite the possibility of improving the strength and a number of technological characteristics of (...)
MINIATURIZATION AS A WAY TO PRESERVE MATERIAL IN THE MANUFACTURE OF MICROSTRIP DEVICES (Papers SGEM2018)
D. A. Letavin, N. S. Knyazev
Thursday 11 October 2018 by
ABSTRACT
Microstrip devices have found wide application in various fields of radio engineering.
However, such devices are made on dielectric substrates from various materials - glass,mica, ceramics, etc. In the process of manufacturing microstrip devices, it is possible to use, as etching (...)
MECHANICAL PROPERTIES OF ALUMINIUM ALLOYS CRYSTALLISED IN THE CENTRIFUGE (Papers SGEM2018)
A. Telesheva, A. Degtyareva, G. Shokobaeva, B. Syzdykova, G. Tashkeyeva
Thursday 11 October 2018 by
ABSTRACT
Continuous improvement and technical sophistication of modern machinery and
equipment, extreme conditions of process operations dictate strict requirements for
structural materials to ensure their high strength, workability and reliability. A
perspective way to improve the (...)
MINIATURIZATION OF MICROSTRIP DEVICES FOR SMALL SPACE SATELLITES AND AIRCRAFT (Papers SGEM2018)
D. A. Letavin, N. S. Knyazev
Thursday 11 October 2018 by
ABSTRACT
Miniaturization of microwave devices, such as directional couplers, filters, switches,
etc., is an important practical problem due to the trend of integration of portable and
small high-frequency electronics. In this paper, we consider the technology of
developing a miniature (...)
MORPHOLOGICAL AND STRUCTURAL CHARACTERIZATION OF THIN LAYERS OF TIN COATED ON THE SILICON SUBSTRATE (Papers SGEM2018)
S. Constantinescu
Thursday 11 October 2018 by
ABSTRACT
Morphological and structural characterisations were carried out on the layers of TiN
lodged on the silicon substrate with orientation (100). The analysis of the crystalline
structure of TiN films was performed by X-ray diffraction (XRD), using a
diffractometer high resolution, (...)
NANO-COMPOSITION TI-CO(MN) COATINGS INVESTIGATION (Papers SGEM2018)
G. Yar-Mukhamedova, N. Sakhnenko, M. Ved, I. Yermolenko, R. Atchibayev
Thursday 11 October 2018 by
ABSTRACT
The structure and the properties of the oxide nano-composition coatings formed on
titanium in the diphosphate based electrolytes by means of plasma electrolytic oxidation in the spark-discharge regime at application of interelectrode voltage 100 to 130 V have been studied. The (...)
NANOCOMPOSITES BASED ON RUBBER AND NANOCLAY (Papers SGEM2018)
M. D. Stelescu, G. Craciun, L. Alexandrescu, C. Pelin, M. Georgescu
Thursday 11 October 2018 by
ABSTRACT
This paper presents studies on the development of nanocomposites based on rubber and layered nanoclay such as organically modified montmorillonite. The effect of
introducing nanoclay in a mixture based on ethylene-propylene-diene terpolymers filled
with precipitated silica was (...)
NANODIMENSIONAL METAL MANGANATES (IV) IN THE PROTECTION COATING (Papers SGEM2018)
M. R. Ziganshina, F. A. Aliyew, S. A. Karandashov, A. P. Svetlakov, I. I. Shakurov
Thursday 11 October 2018 by
ABSTRACT
A technical progress in various fields of the national economy is accompanied by
escalating aggression of the environment that complicates the protection of different
objects made from steel, which is the main modern constructional material. Because of
the corrosion attack, 50 (...)
NANOTECHNOLOGY IN CONCRETE MATERIALS - A POWERFUL MACRO-MATERIAL INFLUENCED BY ITS NANO-PROPERTIES (Papers SGEM2018)
L. JUDELE, D. LEPADATU, I. ANTONESCU, A. BOBOC, D. I. MORARIU
Thursday 11 October 2018 by
ABSTRACT
A wide range of researches demonstrated that the application of nanotechnology can
improve the performance of other traditional construction materials, such as concrete,
steel, glass, paint, coatings, insulating materials, et. al. Noteworthy improvements in
concrete strength, (...)
Home | Contact | Site Map | Site statistics | Visitors :
353063
en MICRO AND NANO TECHNOLOGIES ?
© Copyright 2001 International Multidisciplinary Scientific GeoConference & EXPO SGEM. All Rights Reserved.
