NEW SGEM Scientific Online eLibrary
After a long time work, our pride is the absolutely new SGEM Online eLibrary, available here. The Library is created according the rules of the International databases, with a whole needed information and ability to export the article in BIB format. Try and spread your experience with us.
Till we complete the new library with papers from all the years, you can use this link /Full Old Library/, if papers that you need are not visible yet here.

DYNAMIC RESISTANCE TEST FOR SAFETY VALVE IN ELECTRO-HYDRAULIC CONTROL SYSTEM FOR POWERED ROOF SUPPORTS

Szurgacz, D.; Brodny, J.
Abstract:
An electrohydraulic control system as a part of powered roof support is required to be equipped with a safety valve. The aim of the valve is to protect the roof support against overloads that may damage hydraulic legs, and subsequently lead to loss of stability of the whole support unit. In order to select optimal operating parameters of the safety valve it is necessary to carry out tests in conditions similar to those in the mine. The tests should reflect the actual load condition of the support as much as possible. The tested safety valves were impacted by dynamic loads as they pose the biggest threat. Such a load condition occurs in the case of dynamic impact of rock mass on the support. The test that included the dynamic load was carried out using a drop weight tester. Here, the source of the load is impact mass falling from a certain height. The tests included hydraulic legs equipped with safety valves. The article presents the results of the tests. Their purpose is to determine the value of the operating pressure at which the valve will open and close These values are extremely important for the correct operation of the valve, and subsequently for ensuring the safety of the roof support and the stability of protected workings. The paper also analyses the construction and operation principle of the safety valve as one of the key elements of the control system of the powered roof support. The Authors believe that the presented research results will contribute to the improvement of safety in underground mining.
SGEM Research areas:
Year:
2018
Type of Publication:
In Proceedings
Keywords:
safety valve; dynamic tests; control efficiency; mining machinery.
Volume:
18
SGEM Book title:
18th International Multidisciplinary Scientific GeoConference SGEM 2018
Book number:
1.3
SGEM Series:
International Multidisciplinary Scientific GeoConference-SGEM
Pages:
343-350
Publisher address:
51 Alexander Malinov blvd, Sofia, 1712, Bulgaria
SGEM supporters:
Bulgarian Acad Sci; Acad Sci Czech Republ; Latvian Acad Sci; Polish Acad Sci; Russian Acad Sci; Serbian Acad Sci & Arts; Slovak Acad Sci; Natl Acad Sci Ukraine; Natl Acad Sci Armenia; Sci Council Japan; World Acad Sci; European Acad Sci, Arts & Letters; Ac
Period:
02-08 July, 2018
ISBN:
978-619-7408-37-9
ISSN:
1314-2704
Conference:
18th International Multidisciplinary Scientific GeoConference SGEM 2018, 02-08 July, 2018
DOI:
10.5593/sgem2018/1.3/S03.044
Hits: 97
/** LightBox **/ /** END LightBox **/ /** SweetAlert **/ /** **/ /** SweetAlert2 **/ /** END SweetAlert2 **/