NEW SGEM Scientific Online eLibrary
After a long time work, our pride is the absolutely new SGEM Online eLibrary, available here. The Library is created according the rules of the International databases, with a whole needed information and ability to export the article in BIB format. Try and spread your experience with us.
Till we complete the new library with papers from all the years, you can use this link /Full Old Library/, if papers that you need are not visible yet here.

DAMAGE ANALYSIS OF THE INDUSTRIAL FLOOR IN THE STORAGE HALL

Tomasovicova, D.; Jendzelovsky, N.; Marton, P.
Abstract:
This article discusses typical problem of industrial floors, i.e. cracks. Slight cracks are usually effect of volume changes such as shrinkage and creep. There are also other reasons why cracks appear. For example: inappropriate design, heavier load than expected or wrong realization of the concrete slab. Cracks, which are caused by mentioned reasons, are wider and deeper. Wide and deep cracks can cause another defects such as concrete crumbling along the crack. They can be a problem for maintenance and service life of the floor. Owners and occupants of the buildings do not want to see any cracks and they often require a correction or a compensation from constructors. In this paper, the occurrence of the cracks in the storage hall was analyzed. Analyzed cracks were through the entire thickness of the concrete slab. They were wide and deep so they could not be caused by volume changes. The position of the cracks and provided documentation suggested that the problem will be caused by wrong design or realization. The stress analysis of three-dimensional model has been done in software Ansys 17.2. The model of the concrete slab has interacted with all layers according to the investigation of actual floor construction.
SGEM Research areas:
Year:
2017
Type of Publication:
In Proceedings
Keywords:
industrial floor; cracks; stress analysis; damage
Volume:
17
SGEM Book title:
17th International Multidisciplinary Scientific GeoConference SGEM 2017
Book number:
12
SGEM Series:
International Multidisciplinary Scientific GeoConference-SGEM
Pages:
191-198
Publisher address:
51 Alexander Malinov blvd, Sofia, 1712, Bulgaria
SGEM supporters:
Bulgarian Acad Sci; Acad Sci Czech Republ; Latvian Acad Sci; Polish Acad Sci; Russian Acad Sci; Serbian Acad Sci & Arts; Slovak Acad Sci; Natl Acad Sci Ukraine; Natl Acad Sci Armenia; Sci Council Japan; World Acad Sci; European Acad Sci, Arts & Letters; Ac
Period:
29 June - 5 July, 2017
ISBN:
978-619-7105-99-5
ISSN:
1314-2704
Conference:
17th International Multidisciplinary Scientific GeoConference SGEM 2017, 29 June - 5 July, 2017
DOI:
10.5593/sgem2017/12/S02.025
Hits: 136
/** LightBox **/ /** END LightBox **/ /** SweetAlert **/ /** **/ /** SweetAlert2 **/ /** END SweetAlert2 **/